![](../../../images/space.gif) |
![](../../../images/layout/shadow.gif) |
<<O>> Difference Topic
RM11
(r1.1 - 26 Jul 2005 - Home.hackish)
|
|
Added: |
> > |
%META:TOPICINFO{author="hackish" date="1122401143" format="1.0" version="1.1"}%
Author: Deluded
Date: 04-04-03 01:19
RM11 CAN be replaced with 3 resistors:
From pin 1 to 2...10k ohm (digikey# 10kebk-nd (200 for US$4.70))
2 to 3...51K (51kebk-nd)
3 to 8...12K (12kebk-nd)
No MIL and normal operation
unplug Vtec sol and MIL functions correctly by throwing CEL.
I'm not smart, just observant and persistent: look closely at a P72 if you want to see where I came up with this.
Editors note: This RM11 replacement will probably NOT work for auto ECUs if the feedback on the auto trans lockup solenoid is required. A true RM11 or additional resistors would be required to run both a vtec and auto trans solenoid with feedback.
I removed an RM11 and measured all the resistances. This should allow someone to come up with an electrically identical replacement.
| | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 1 | x | 9k | 27k | 9k | 27k | 9k | 27k | 24k |
| 2 | | x | 27k | 17k | 30k | 17k | 30k | 26k |
| 3 | | | x | 30k | 20k | 30k | 20k | 10k |
| 4 | | | | x | 27k | 17k | 30k | 27k |
| 5 | | | | | x | 30k | 20k | 10k |
| 6 | | | | | | x | 27k | 27k |
| 7 | | | | | | | x | 10k |
| 8 | | | | | | | | x |
|
|
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise. |
|