![](../../../images/space.gif) |
![](../../../images/layout/shadow.gif) |
|
Changed: |
< < |
Removing the knock detection is simple: Resolder R118 and R119 into R142, 143. Then, Remove R101. Finally, remove the knock board itself.
| > > |
Removing the knock detection is simple: Resolder R118 and R119 into R142, 143. Then, Remove R101 (optional). Finally, remove the knock board itself.
|
Added: |
> > |
Originaly posted by prelude-driver
here is how it works,
R101 is a current limit to a signal on the KS, you need it with KS but you can leave it in because it does not go anywhere else.
R118/119 are current limiters on the clock & data signals to the KS,
if you remove the KS you must remove them because of the next resistors.
R142/143 are pullup resistors for the clock & data lines,
you dont use them if you have a KS because there are pullups on the KS itself, but if the KS is removed then you must fit these to stop the lines from floating.
they are 10k btw. |
|
Changed: |
< < |
removing knock is simple: resolder R118 and R119 into R142, 143
But KEEP the Knock Sensor board soldered !!
| > > |
Removing the knock detection is simple: Resolder R118 and R119 into R142, 143. Then, Remove R101. Finally, remove the knock board itself.
|
Added: |
> > |
Here's what a knockless P14 looks like: CLick Here! |
|
Deleted: |
< < |
|
Added: |
> > |
But KEEP the Knock Sensor board soldered !! |
|
Added: |
> > |
%META:TOPICINFO{author="synoptic" date="1138251720" format="1.0" version="1.1"}%
%META:TOPICPARENT{name="ECUHardwareMods"}%
removing knock is simple: resolder R118 and R119 into R142, 143
- no_knock.jpg:
%META:FILEATTACHMENT{name="no_knock.jpg" attr="" comment="" date="1138251632" path="no_knock.jpg" size="31356" user="synoptic" version="1.1"}% |
|
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise. |
|